Selected Publications
 from the Residual Stress User Center

Proposal Review and Publication Policy

Applicants must submit a short High Temperature Materials Laboratory research proposal for review. It is recommended that the user contact the Group Leader and/or staff to be involved in the research effort prior to submitting the proposal. The HTML Proposal Review Committee meets monthly to evaluate proposals and make recommendations on their acceptance. It also recommends priorities for use of instruments within HTML user centers, consistent with DOE missions and objectives. Applicants are notified about decisions normally no later than 2 weeks after review by the committee.

Users conducting nonproprietary research must agree that results will be submitted for publication in the open literature no more that 6 months after such research is concluded, and must be co-authored by the appropriate HTML researchers. Nonproprietary research at the HTML is usually conducted at no direct cost to the user, although occasionally charges are assessed for unusual services.

Users conducting proprietary research must pay a full cost recovery fee. In proprietary projects all the data and results are the property of the user and there is no publication requirement.

Selected RSUC Publications

• Chien, Wen, Ming, C. J. Rawn, D. Chandra, J.S.  Franklin, A.K. Helmy, “ X-ray diffractometry studies and lattice parameter calculation on KNO3-NH4NO3
  Published Powder Diffraction, Vol 20, No. 2, 2-4, 0885-7156  (June 05)
  
• Hua, Jiang, R.. Shivpuri, X. Cheng, V. Bedekar,  Y. Matsumoto, F. Hasimoto, and T. R. Watkins, “Effect of Feed Rate, Workpiece Hardness and Cutting Edge on Subsurface residual Stress in the Hard Turning of Bearing Steel Using Camfer+Hone-cutting Edge Geometry,” Submitted Material Sc & Eng. A Journal 394 (1-2): 238-248 MAR 25, 2005
  
• Ice, G, C. R. Hubbard, B. C. Larson, J.D. Budai, S. Spooner, “Kirkpatrick-Baez Microfocusing Optics for Thermal Neutrons,” Nuclear Instruments and Methods A 539, 312-320 (2005)S.A.
  
• Stoica, A. D,  M. Popovici,  X. L. Wang, D. Q. Wang, and C. R. Hubbard*, “Neutron Imaging with Bent Perfect Crystals II, Practical Multi-wafer Approach, “ Journal of Applied Crystallography,  37, pp. 426-437 (2004)
•  International Materials Institutes (IMI), Advanced Neutron Scattering Network for Education and Research (ANSWER): With a Focus on Mechanical Behavior of Materials, Liaw, P.K., H. Choo, R. A. Buchanan, C.R. Hubbard
• <>Role of the PDF in Structure Solution by Powder Diffraction Methods, Hubbard, C.R., Transactions of American Crystallographic Association,  ACA; Vol. 37,  pp 143-149,  2003.
  
• Current Understanding of Cracking of Recovery Boiler Primary Air Port Composite Tubes, Keiser, J.R., Singbeil, D.L., Sarma, G. B., Kish, J. R., Choudhury, K. A. Frederick, L.A., Yuan, J, Jette, F, Hubbard,C.R., Swindeman, R.W., and Singh,P.M., published in the Proceedings of 2003 TAPPI Fall Technical Conference: Engineering, Pulping & PCE&I,  10/26/2003-10/30/2003, FALLCD-03, Session 13-2, ISBN 19307657309
  
• X. Wang, B.I. Lee, M.Z. Hu, E.A. Payzant, and D.A. Blom, "Synthesis of Nanocrystalline BaTiO3 by Solvent Refluxing Method", J. Mater. Sci. Lett. 22, 557-559 (2003)
  
• Basic Studies of Welds in a Tank Car Steel:  Residual Stress Measurements and Weld Characterization for TC-128B Plate Steel, Sutton, M.A., I. Abdelmajid, W. Zhao, D.-Q. Wang, and C.R. Hubbard,  ASME Journal of Pressure Vessel Technology, 124 (4): 405-414, November 2002
  
•  Residual Stress Analysis in 2024-T3 Aluminum Friction Stir Butt Weld by Neutron Diffraction," Sutton, M.A and A. P. Reynolds, D. Q. Wang, C. R. Hubbard, " Journal of Engineering Materials and Technology,  Vol 124, 215-221, April 2002.